Fukuoka Institute of Technology REPOSITORY SYSTEM

HOME    repository info    mypage        Japanese    library    university    Feedback

Fukuoka Institute of Technology Repository >
02.University Bulletins & Report >
null >
Vol.2 >

Title :多軸揺動加圧によるすえ込み鍛造加工に関する研究
Authors :廣田 健治
Issue Date :18-Apr-2020
Abstract :In order to reduce forging load, we focused on the reduction of contact area with forging dies and proposed a new method with the flexible rocking motions created by using multiple linear actuators. A cylindrical specimens of annealed pure aluminum was compressed between flat dies up to a half of the initial height, in which a rocking motion was applied to the lower die in the latter half of the compression. The forging load was reduced by up to approximately 45% compared with the conventional upsetting. The reduction of load increased with increasing the rocking angle and its frequency.
Type Local :紀要論文
ISSN :24345725
Publisher :福岡工業大学総合研究機構
Comment :エレクトロニクス研究所(Electronics Research Laboratory)
URI :http://hdl.handle.net/11478/1526
citation :福岡工業大学総合研究機構研究所所報
Citation :福岡工業大学総合研究機構研究所所報 Vol.2 p.31 -34
Appears in Collections:Vol.2

Files in This Item:

File Description SizeFormat
11478-1526_p31.pdf594KbAdobe PDFView/Open